Acoustic Zen's Floorstanding Loudspeakers

 

Adagio

Reviews

After years of research and development, Acoustic Zen has developed the world's lowest distortion and most musically coherent loudspeakers! Through innovative design, superior component and cabling selection, solid construction and careful, precise hand assembly, the Acoustic Zen Adagio loudspeakers deliver music without compromise.

The Adagio floorstanding loudspeaker is a two-way transmission-line system featuring a 1.5 inch circular ribbon tweeter and dual 6.5 inch midrange/woofer "underhung" voice coil, ceramic-coated drivers. The three drivers are configured in a time and phase aligned D'Appolito MTM arrangement providing lifelike imaging over a large sweet spot range. The Adagio features superior cabinet construction and aesthetic contours that actually reduce cabinet diffractions.

The Adagios are perfect for any listening room, providing a full-range, fast musical experience full of detail, clarity and accurate timbre reproduction.

Specifications

Design 2-way transmission line
Frequency Response 30 Hz to 25 kHz (+/- 3 dB)
Crossover 3rd order (Linkwitz/Riley)
Tweeter 1 5/8" round ribbon
Midrange/Woofer 2 6.5" underhung voice coil drivers
Impedance 6 Ohms nominal
Efficiency 89 dB SPL @ 1 meter
Power Handling 50 - 200 wpc RMS
Dimensions 48" H x 9" W x 13" D
1219mm H x 229mm W x 330mm D
Weight 78 lbs. (33.5 Kg) each
 

Crescendo Mark II

Following the success of the Adagio and Adagio Junior loudspeakers, Acoustic Zen Technologies set forth to create another ground-breaking loudspeaker design based on our no compromise philosophy:

The Crescendo loudspeaker is a three-way full range loudspeaker built on the same component, cabling and cabinet quality of the Adagios. It incorporates two 5 inch midrange drivers, two 8" woofers and one horn-loaded ribbon tweeter all in a transmission line design. Like the Adagios, the upper half of the Crescendo is a D'Apolito MTM configuration, featuring two 5 inch midrange "underhung" voice coil ceramic-coated drivers around a 2 inch horn-loaded ribbon tweeter. In addition, the bottom of the Crescendo tower features two 8 inch "underhung" voice coil ceramic-coated woofers.

Now in its second generation, the Crescendo Mark II features drivers with larger magnet assemblies for even higher linearity and heavier and reinforced cabinets for even lower resonance and overall lower distortion. The resulting sound is remarkably clear, full, accurate and lifelike.

Specifications

Design 3-way transmission line
Frequency Response 20 Hz to 30 kHz (+/- 3 dB)
Crossover 3rd order (Linkwitz/Riley)
Tweeter 2" horn loaded ribbon
Midrange 2 5" underhung voice coil drivers
Woofer 2 8" underhung voice coil drivers
Impedance 6 Ohms nominal
Efficiency 90 dB SPL @ 1 meter
Power Handling 50-200 wpc RMS
Dimensions 50" H x 11" W x 17" D
1270mm H x 279mm W x 432mm D
Weight 125 lbs (62.5 Kg) each
 

Maestro

More information coming soon!

Specifications

Design 4-way transmission line
Frequency Response 20 Hz to 40 kHz (+/- 3 dB)
Crossover 4th order
Tweeter 2" horn loaded ribbon
Midrange High 2 5" underhung voice coil drivers
Midrange Low 8" underhung voice coil driver
Woofer 2 10" underhung voice coil drivers
Impedance 6 Ohms nominal
Efficiency 87 dB SPL @ 1 meter
Power Handling 150 - 300 wpc RMS
Dimensions 67" H x 15" W x 18" D
1702mm H x 381mm W x 457mm D
Weight 225 lbs. (112 Kg) each